How to Replace a Volvo Replacement Key Fob
Your Volvo key fob is able of doing so much more than just unlocking and locking your car. It's also a highly sophisticated anti-theft tool with specialized technology that communicates with your car to in preventing theft.
What happens is the outcome if your key fob's battery is dead? Our team at Volvo Cars Mission Viejo has all the answers!
How to unlock your Vehicle
Modern electronic key fobs provide greater convenience and function compared to manual keys. However, they do require batteries that eventually degrade over time and will require replacement. If your Volvo keyfob works only intermittently, the battery could be failing and you'll have to replace it quickly.
There are volvo xc90 key that you can follow to replace your Volvo key fob battery on your own. First, find a clean work surface to perform the procedure. Then, lay out all the tools needed. Find the battery hatch, and turn it open using the flathead, a coin, or other similar tool. Then, carefully pull out the battery by lifting the side closest to the hook of the key-ring. Be sure to wear rubber gloves to protect the clips or electronic contact surfaces.
Place the new battery in the socket after the previous one was removed. Make sure that the positive side is facing upwards and that it's seated in all of the clips. Then slide the cover down and towards the key-ring loop until it is loose and slides off. Uncover the cover and reveal the hidden mechanical key blade. This can be used to unlock your car from the driver's door if you have lost or damaged the key fob.
How to Start Your Vehicle
Modern vehicles come with key fobs that do more than just unlock and secure the doors. They can also be used for other useful functions like summoning and auto-parking the vehicle. In fact, the new Volvo XC60 can even remotely start your engine with its key fob buttons. But how exactly does it work?
First, locate a clean work surface where you can lay out all the required items needed for this project. Then lay the fob on the work surface, with its Volvo logo facing upward. Use a flathead or coin, or similar tool to flip open the battery hatch. Avoid touching the electronic contact surfaces using your tools. This can cause the fob's mechanism to stop working properly.
Once the hatch has been opened, place the battery into its socket. Make sure the positive (+ side) is facing up. Once the clips have been locked into place, replace cover of the battery and then reassemble the fob.
By pressing the unlock button only once, the alarm will be disengaged and the door for the driver will be unlocked. If you press it again it will unlock all doors and tailgate. The unlock button is also useful for opening the windows to let in fresh, cool air in the summer heat. If you'd like to go further than that, the keyfob can be used to turn on the ERS that will begin the climate control system of your vehicle. It will then warm or cool the vehicle to the desired temperature settings when the vehicle is parked.
How do I replace the battery?
If your key fob isn't locking or unlocking your vehicle like it did in the past it could be time to change the battery. The battery can be changed by using a flathead screwdriver plastic pry bar or other small tools. First look for the small slot where the backup / emergency metal ignition key used to be. Use the blade of your screwdriver or pry bar tool into the slot and gently open the rear of the fob of the key. Once the fob has been opened you can locate the CR2032 3V battery and remove it. Replace the battery and snap back to the fob.
Note: Certain older Volvo models have another type of battery which is the CR2025. CR2025 batteries have a thickness of 7 tenths one millimeter less than CR2032 and you'll have to be extra cautious when replacing your battery.
Follow these tips to change the battery in your Volvo. Contact Jennings Volkswagen if you have any concerns. Our team of experts is happy to assist. We also have a complete service department to take care of any car maintenance or repair you might require. Book your appointment now!
How to unlock the Hidden Key Blade
Keyfobs from Volvo have changed in recent years. Key fobs can be more than just a device to lock and start your car. They can also open the windows and give you an additional boost if you require. You will first need to master the use of your key fob to fully unlock its potential.
Your key fob comes with a transponder which has been programmed specifically for your Volvo. When you insert it into the ignition barrel, an antenna reads the code and compares it with the one stored in your car's start inhibitor module. If the codes do not coincide, your vehicle will not start. This is a crucial security feature that stops your Volvo car from starting if you select the wrong key.
If you lose your keys then you'll need to take it to a dealer to get it replaced, and your car programmed. This process can last up to 10 working days and can cost a lot of money. There is an alternative to cut out some of the cost by doing the programming at home. You can find all the details you require in your owner's guide or on the internet. Take off the logo and non-logo covers and place your key fob on a clean surface. Find the gray button on the top right corner of the fob, and push it down. The cover will be opened to reveal the CR2032 3V battery.